Join date: Jul 11, 2022


How To Build An Orbeez Gun

If you're a fan of building things and have some basic engineering skills, you might be interested in building your own Orbeez Gun. This interesting toy is made up of simple parts that can be assembled with basic tools, and it's a fun way to spend an afternoon or evening.

Start with an empty water bottle

To make your orbeez gun, you'll need an empty water bottle and some Borax. Mix one tablespoon of Borax with enough water to fill the bottle. Bury the bottle in the ground so that the top is just below the surface. Leave it there for two weeks, then take it out and shake it off. You now have your orbeez gun!

1. Fill the bottle nearly to the top with water.

2. Screw the cap on tightly, making sure it’s airtight.

3. Stick a straw into the lid of the bottle and poke it about halfway up the side of the bottle.

4. Aim the straw at an open window or door and squeeze the trigger.

The great thing about this toy is that you can reuse the same water bottle over and over again, which makes it a very cost-effective way to have fun and teach your kids about science at the same time!

Get a clear straw

If you're looking for a fun and easy way to make your own homemade orbeez gun, you need to get a clear straw. You can find these straws at most convenience stores. Simply cut the straw into small pieces and then glue them together using a hot glue gun or a sealant. You can also paint or add decorations to the straw if you'd like. When you're finished, simply insert the straw into the end of the Orbeez gun barrel and fire away!

Cut a hole in the bottle cap

The first step is to cut a hole in the bottle cap. You can do this with a pair of scissors or a sharp knife. Make sure that the hole is big enough so that the end of the straw fits inside it.

Next, fit the straw into the hole and position it so that the end of the straw is pointing down. Then, push down on the straw until it fits snugly into the hole. Finally, hold onto the bottle cap and twist it until you have created a tight seal around the straw.

Add your Orbeez!

If you are looking to build your own Orbeez Gun, this tutorial will show you how! All you need is some plastic bags and a few common household supplies. You can even create your very own Orbeez markers by adding a dab of paint or glitter to the tips of the Orbeez.

The first step is to gather your supplies. You will need three different colors of plastic bags, a marker, scissors, and a bowl.

To make the Orbeez markers, cut small holes in one end of each bag. Then, fill each bag with as much water as you like and twist the top shut. This will create little balls of water that act as markers.

Now it’s time to assemble your Orbeez gun! Start by filling one end of the tube with water. Place one Orbeez marker in the water and let it sit for a few minutes so that it starts to swell up. Hold the marker above the end of the pipe and cut it off with scissors. Do this until you have removed all of the markers from the tube.

Next, empty out all of the water from the tube and refill it with a different color. Place one Or

Put the cap on

The Orbeez Gun is a fun toy that you can make at home. It is made from simple materials, and it is easy to build. The Orbeez Gun is a replica of the weapon used in the movie "Toy Story."

Thorton Clemmie

More actions